|
AMEK2011 | Computer Aided Design | 2+1+0 | ECTS:4 | Year / Semester | Fall Semester | Level of Course | Short Cycle | Status | Compulsory | Department | DEPARTMENT of ELECTRONICS and AUTOMATION | Prerequisites and co-requisites | None | Mode of Delivery | | Contact Hours | 14 weeks - 2 hours of lectures and 1 hour of practicals per week | Lecturer | Öğr. Gör. Dr Emre Deniz YALÇIN | Co-Lecturer | Öğr. Gör. Gül Gedik GÜLTEKİN | Language of instruction | Turkish | Professional practise ( internship ) | None | | The aim of the course: | The course provides the ability needed for machine design and manufacturing, and using 3D modeling programmes provides the ability of manufacturing at short time and practically. |
Learning Outcomes | CTPO | TOA | Upon successful completion of the course, the students will be able to : | | | LO - 1 : | Be able to drawing in the direction of technical drawing's principle | 1,3,4,10 | 1,3,4 | LO - 2 : | Be able to two-dimensional drawing on the computer
| 1,3,4,10 | 1,3,4 | LO - 3 : | Be able to create 3-D drawings | 1,3,4,10 | 1,4 | LO - 4 : | Be able to transfer drawings files to other software | 1,3,4,10 | 1,4 | CTPO : Contribution to programme outcomes, TOA :Type of assessment (1: written exam, 2: Oral exam, 3: Homework assignment, 4: Laboratory exercise/exam, 5: Seminar / presentation, 6: Term paper), LO : Learning Outcome | |
Introduction to Computer Aided Technical Drawing, AutoCAD Drawing Programme and Its Applications, Geometrical Drawing Examples in AutoCAD, General Concepts in 3D Modeling.
|
|
Course Syllabus | Week | Subject | Related Notes / Files | Week 1 | Introduction to computer aided technical drawing.
Basic Parameters
| | Week 2 | Layers and Lines
| | Week 3 | 2D Drawing Geometric Shapes (Draw Toolbar)
| | Week 4 | 2D Drawing and Editing Shapes (Modify Toolbar)
| | Week 5 | Dimensioning Commands And Dimensioning Settings
| | Week 6 | Creating Isometric Draft
| | Week 7 | Isometric Dimensioning
| | Week 8 | 3D Drawing Coordinate System and Basic Parameters
| | Week 9 | Midterm Exam | | Week 10 | Creating a Solid by Height, Creating a Solid by Revolving, Creating a solid by Sweeping | | Week 11 | Creating a Model Using Stock Prismatic Solids
| | Week 12 | Solid Editing Toolbar
| | Week 13 | 3D Modify Toolbar
| | Week 14 | Use of Plottersand Printer | | Week 15 | Print-Out
| | Week 16 | Final Exam | | |
1 | CAN, Murat. 2008; AutoCAD UygulamalarıGÖK, Kadir. 2008; AutoCAD | | |
Method of Assessment | Type of assessment | Week No | Date | Duration (hours) | Weight (%) | Mid-term exam | 9 | 22/11/2021 | 0,30 | 30 | Practice | 1 2 3 4 5 6 7 9 10 11 12 13 14 | | 1 | 20 | End-of-term exam | 16 | 17/01/2022 | 0,30 | 50 | |
Student Work Load and its Distribution | Type of work | Duration (hours pw) | No of weeks / Number of activity | Hours in total per term | Yüz yüze eğitim | 3 | 14 | 42 | Sınıf dışı çalışma | 0 | 14 | 0 | Laboratuar çalışması | 0 | 0 | 0 | Arasınav için hazırlık | 2 | 7 | 14 | Arasınav | 0 | 1 | 0 | Uygulama | 1 | 14 | 14 | Klinik Uygulama | 0 | 0 | 0 | Ödev | 1 | 12 | 12 | Proje | 0 | 0 | 0 | Kısa sınav | 1 | 10 | 10 | Dönem sonu sınavı için hazırlık | 2 | 14 | 28 | Dönem sonu sınavı | 0 | 1 | 0 | Diğer 1 | 0 | 0 | 0 | Diğer 2 | 0 | 0 | 0 | Total work load | | | 120 |
|