|
|
| MET3010 | Metallurgy and Materials Lab - I | 1+0+2 | ECTS:3 | | Year / Semester | Spring Semester | | Level of Course | First Cycle | | Status | Compulsory | | Department | DEPARTMENT of METALLURGICAL and MATERIALS ENGINEERING | | Prerequisites and co-requisites | None | | Mode of Delivery | Face to face, Group study, Lab work , Practical | | Contact Hours | 14 weeks - 1 hour of lectures and 2 hours of laboratory per week | | Lecturer | Prof. Dr. Aykut ÇANAKÇI | | Co-Lecturer | PROF. DR. Sultan ÖZTÜRK,PROF. DR. Hamdullah ÇUVALCI,PROF. DR. Aykut ÇANAKÇI,ASSOC. PROF. DR. Temel VAROL,DOCTOR LECTURER Raşit SEZER,DOCTOR LECTURER Mustafa ASLAN,DOCTOR LECTURER Fatih ERDEMİR, | | Language of instruction | Turkish | | Professional practise ( internship ) | None | | | | The aim of the course: | | The aim of this course is to give the oppurtunity to the students to practice the information they have learned theoretically.
|
| Learning Outcomes | CTPO | TOA | | Upon successful completion of the course, the students will be able to : | | | | LO - 1 : | learn to practice the theoretical knowledge on the mechanical properties of materials to real samples. | 4,5,6,12 | | | LO - 2 : | learn to do experiments. | 4,5,6,12 | | | LO - 3 : | learn to use test instruments. | 4,5,6,12 | | | LO - 4 : | Learn to write an experimental report. | 4,5,6,12 | | | CTPO : Contribution to programme outcomes, TOA :Type of assessment (1: written exam, 2: Oral exam, 3: Homework assignment, 4: Laboratory exercise/exam, 5: Seminar / presentation, 6: Term paper), LO : Learning Outcome | | |
| Sample preparation,Tensile Test (Steels and Nonferrous Metals), Impact Test, Hardness Measurement (BSD, VSD and RSD-C Hardness Tests), Bending Test, Fracture Toughness (HV Detection), Microhardness, X-ray Diffraction and Analysis of Pattern, Sintering of Metal Powders, Heat Treatment of Steels (Normalization, Hardening, Tempering, Softening), Abrasion Test,
|
| |
| Course Syllabus | | Week | Subject | Related Notes / Files | | Week 1 | Sample Preparation for Optical Microscopy and Metallography | | | Week 2 | Tensile Test | | | Week 3 | Impact Test | | | Week 4 | Hardness Measurement (BSD, VSD and RSD-C Hardness Tests) | | | Week 5 | Tilt Test | | | Week 6 | Fracture Toughness | | | Week 7 | microhardness | | | Week 8 | Delivering reports | | | Week 9 | X-ray Diffraction and Analysis of Pattern | | | Week 10 | Metal Powder Sintering, Wear Test | | | Week 11 | Heat Treatment of Steels (Normalization, Hardening) | | | Week 12 | Heat Treatment of Steels (Tempering, Softening) | | | Week 13 | Heat Treatment of Steels (Normalization, Hardening) | | | Week 14 | Heat Treatment of Steels (Tempering, Softening) | | | Week 15 | Delivering reports | | | Week 16 | Final Exam | | | |
| 1 | McClintock, F. A. , Argon, A. ,1996 "Mechanical Behavior of Materials", Addison-Wesley Publishing Company, Inc. , Reading, USA. | | | 2 | Dieter, G. E. , 1976 "Mechanical Metallurgy", Second edition, McGraw-Hill Book Company, New York, USA. | | | 3 | Çimenoğlu , H. , Kayalı, E. S. , 1994 "Malzemelerin Yapısı ve Mekanik Davranışları", İkinci baskı, İTÜ Kimya-Metalurji Fakültesi, Yayın No: 4, İstanbul. | | | |
| Method of Assessment | | Type of assessment | Week No | Date | Duration (hours) | Weight (%) | | Laboratory exam | 1
2
3
4
5
6
7
9
10
11
12
13
14 | | | 25 | | Homework/Assignment/Term-paper | 8
15 | | | 25 | | End-of-term exam | 16 | | 2 | 50 | | |
| Student Work Load and its Distribution | | Type of work | Duration (hours pw) | No of weeks / Number of activity | Hours in total per term | | Yüz yüze eğitim | 2 | 13 | 26 | | Sınıf dışı çalışma | 1 | 13 | 13 | | Laboratuar çalışması | 1 | 13 | 13 | | Arasınav için hazırlık | 1 | 13 | 13 | | Arasınav | 2 | 1 | 2 | | Uygulama | 1 | 13 | 13 | | Klinik Uygulama | 0 | 0 | 0 | | Ödev | 1 | 2 | 2 | | Proje | 0 | 0 | 0 | | Kısa sınav | 1 | 3 | 3 | | Dönem sonu sınavı için hazırlık | 1 | 13 | 13 | | Dönem sonu sınavı | 2 | 1 | 2 | | Diğer 1 | 0 | 0 | 0 | | Diğer 2 | 0 | 0 | 0 | | Total work load | | | 100 |
|